For custom sized decals or design work, please Contact Us.

Do you race in the BSB Support Classes or Road Races? Please contact us to explore sponsor opportunities.

Filters

Full Bike Decal Set
£250.00
Race Number Sets
£30.00
Sponsor Decal
£10.00
Visor Strip
£30.00
RACE DECALS STACK
£10.00 £30.00
Sale
Custom Tank Pad
£30.00
Race Warning Label
£5.00 £10.00
Sale
Custom Design
£10.00

No results found

No results match your search. Try removing a few filters.

Vibrant & durable Track Ready Graphics that perform just as hard as you do!

By following our installation and care guide, your RACE Decals will endure the toughest of seasons.

Had an off and thrown it down the road? Are your RACE Decals now damaged? Please get in touch with pictures and we will happily provide you with discounted replacement graphics as a gesture of good will and support, to get you back on track as quickly as possible.

RACE Decals: Premium UV Track Ready Graphics for Motorsport Excellence

In the high-stakes world of motorcycle racing and motorsport, bold, professional visuals are not just an advantage — they are essential. RACE Decals deliver vibrant, high-performance graphics engineered for riders, teams, and organisations that demand durability without compromise. Produced using advanced UV technology, these premium transfers offer exceptional wear resistance, ensuring they withstand the rigours of track conditions, high speeds, abrasive environments, and repeated use.

Designed with precision and built to dominate, RACE Decals provide unparalleled flexibility in branding and sponsorship management. Mid-season sponsor changes, evolving team identities, or strategic shifts in partnerships no longer require costly kit replacements. With a simple peel-and-stick application process, logos, sponsor graphics, and custom designs can be applied quickly and seamlessly — maintaining a sharp, professional appearance throughout the season and beyond.

    1. Prepare the surface — Clean the area thoroughly with isopropyl alcohol and ensure it is completely dry and free of dust or debris.

    2. Peel the backing — Slowly peel away the backing paper from the clear transfer film. Avoid touching the pressure-sensitive adhesive side.

    3. Position the decal — Carefully place the transfer onto your surface. Once it touches, it is very difficult to reposition, so take your time. You can also float your UV Decal with a spritz of water on the surface it is being applied to.

    4. Apply firm pressure — Use a squeegee or your fingers to press firmly across the entire design, working from the centre outwards to remove any air bubbles. This activates the pressure-sensitive glue.

    5. Peel the top film — Slowly peel away the clear carrier film at a 45-degree angle. Peel slowly for best results. If floated, dry or allow the edges to dry to ensure release from the transfer film.

    Tip:
    For best adhesion on curved or tricky surfaces, warm the decal slightly with a hairdryer (on low) before applying.

  • Our RACE Decals 3d Acrylic Transfers are highly durable and designed to withstand the demands of racing, but proper care will keep them looking sharp for years.

    After Application

    • Allow 24–48 hours for the adhesive to fully cure before exposing the decal to heavy use, water, or cleaning.

    • Avoid touching or rubbing the decal during this initial curing period.

    Daily Cleaning & Maintenance

    • Clean gently with mild soap and warm water using a soft cloth or sponge.

    • For tougher dirt (common on bikes), use isopropyl alcohol or a dedicated motorcycle cleaner. Avoid harsh abrasive cleaners, solvents, or petrol-based products.

    • Do not use a pressure washer directly on the decal — high pressure can lift edges over time.

    • Hand washing is recommended. Avoid automatic car washes with harsh brushes if the decal is on bodywork.

    What to Avoid

    • Prolonged exposure to extreme heat (e.g. direct heat guns, very hot engines without protection).

    • Aggressive scrubbing or scraping with sharp objects.

    • Application on non-smooth surfaces; this may allow water to seep underneath and cause the decal to lift.

    • Dishwashers, harsh chemicals, or strong solvents (for helmet or small parts).

    • Leaving the item in a hot vehicle for long periods when possible.

    When applied and cared for correctly, your RACE Decals 3D Acrylic Transfers should last 3–5 years or more with normal racing use, resisting water, UV rays, and scratches.

    Pro Tip: For maximum longevity on race bikes, apply an extra layer of clear protective film or spray (optional) over the decal once fully cured.

  • RACE Decals 3D Acrylic Transfers are designed to be permanent, but they can be removed if needed:

    1. Warm the decal evenly with a hairdryer or heat gun for 20–40 seconds.

    2. Gently lift a corner with a plastic scraper and peel slowly.

    3. Remove any remaining adhesive. We recommend ‘Sticky Stuff Remover’ and a Microfibre Cloth.

    Note: Success depends on the surface. Test on a small area first.